Obala Helgelanda
Dvanaest dana na Kystriksveienu: sest trajekata, Torghatten, Sedam sestara, Bodo. Alternativa E6. Dnevne etape ispod 200 km.
Članci
Istražite našu kolekciju članaka o električnim vozilima, infrastrukturi za punjenje i EV tehnologiji
Empower EIT commissions Dallas center, produces battery-grade lithium carbonate
Empower EIT, a vertically integrated lithium technology and operating company, has begun operation of its direct lithium extraction (DLE) and conversion process at its new new 17,000-square-foot facility in Dallas. The process turns extracted lithium chloride into battery-grade lithium carbonate. The company is aiming to make its first commercial sales in 2027. Empower EIT ran…
Megawatt charging is coming, but most test systems aren’t ready
Sponsored by ITECH. As EV platforms push from 400 V to 800 V and beyond 1,000 V, engineers are facing a growing gap between charging capability and what can be safely tested in real-world conditions. This whitepaper unpacks the concept of “validation anxiety” and the risks tied to reliability, lifecycle performance, and grid interaction. It…
Easelink collaborates with SEG Automotive to scale its automated EV charging system
Easelink’s Matrix Charging system enables automated conductive charging of EVs. This capability is not just about convenience—it facilitates various commercial EV applications and lays the groundwork for future autonomous mobility solutions. It also makes it easier to integrate EVs into V2G applications and other smart energy systems. Now Easelink has partnered with global automotive supplier…
Lighter, more efficient motor for aviation propulsion
Researchers in Scotland have demonstrated a 100 kW fully superconducting axial flux motor for aviation. The prototype system was created by the Applied Superconductivity Laboratory (ASL) at the University of Strathclyde in Glasgow... The post Lighter, more efficient motor for aviation propulsion appeared first on E-Mobility Engineering.
New report: DC-coupled energy hubs reduce costs and overcome grid constraints for EV fleets
Microgrids are a hot topic these days, and with good reason—supporting EV charging infrastructure with battery storage, on-site generation and V2X technology can overcome grid constraints and reduce costs. Cenex has published new research detailing how DC-coupled smart energy hubs can help organisations accelerate fleet electrification while unlock substantial energy savings, lower peak demand and…
Connecticut selects AmpUp to scale Adapt & Earn managed EV charging program
The Connecticut Public Utilities Regulatory Authority (PURA) has selected AmpUp to develop a managed EV charging program in collaboration with the state’s electric utilities. The agency evaluated four pilots in Cycle 1 of the state’s Innovative Energy Solutions (IES) Program, and selected AmpUp’s Adapt & Earn managed charging project for deployment at scale. PURA has…
Pireneji
Dvanaest dana od Biarritza do Carcassonnea preko Gavarnieja i ljetnih prijevoja. Tesla i Ionity u dolinama.
EVSearch reports surging Canadian demand for Chinese EVs
Chinese EVs are headed for Canada. The country has set an initial annual quota of 49,000 Chinese-made EVs, and this will increase to 70,000 within five years. A share of the quota is reserved for vehicles priced below CA$35,000. EVSearch, a Canadian electric vehicle research and discovery platform, has added a new section to its…
In conversation: Jim Edwards
In the world of electrification, battery technology is often cited as the area with greatest opportunity for development. Improvements over recent decades have been clear to see, with EV ranges increasing year on year... The post In conversation: Jim Edwards appeared first on E-Mobility Engineering.
Chip monitors battery state of health
Texas Instruments (TI) has developed a 28 channel battery management chip with electrochemical impedance spectroscopy (EIS) to monitor state of health. “One issue is lack of visibility into the battery cell and engineers have long struggled... The post Chip monitors battery state of health appeared first on E-Mobility Engineering.
Ford and Geely unite in Spain to produce new multi‑energy models from 2028
Ford and Geely Auto have set the stage for one of the most significant industrial shifts in Europe's automotive sector this decade, announcing a new joint venture that will turn Ford's Valencia, Spain, plant into a shared manufacturing hub for next‑generation multi‑energy vehicles. The partnership, revealed on July 23, 2026, aims to secure the long‑term future of the facility, boost... …
E-motor production technology
Manufacturing an EV powertrain with a permanent magnet synchronous motor or an induction motor requires fusion of precise metallurgy, high-speed automation and stringent thermal-electrical isolation. Optimising this process... The post E-motor production technology appeared first on E-Mobility Engineering.
Improved cooling for high-power electric motors
Researchers in Korea have developed a sandwiched magnet that improves the cooling for high-power motors in vehicles and electric shipping. The research team at the Korea Institute of Materials Science (KIMS) developed... The post Improved cooling for high-power electric motors appeared first on E-Mobility Engineering.